Comments for laur.ie

Comment on Naglite2 finally released by Leandro

Leandro — Tue, 31 Aug 2010 15:18:17 +0000

I fixed it , i’m using nagios3.0.2 so i uncommented the code where it said:

# If you have a slightly older version of Nagios you’ll need to uncomment these. They were in the file twice in older versions.

Comment on Naglite2 finally released by Leandro

Leandro — Mon, 30 Aug 2010 17:38:23 +0000

Hi!, im trying it out
I get the flowing warning:
Warning: strftime() expects parameter 2 to be long, string given in /var/www/Naglite2/inc.php on line 145
in various lines where the function is being used
any ideas?
If i scroll down i can see it working

Comment on CactiView by Network Monitoring Display Screen

Network Monitoring Display Screen — Tue, 10 Aug 2010 15:24:00 +0000

[...] + Nagios along with Cacti View and Naglite2 all free. Reply With Quote [...]

Comment on Draytek 2710 series and multi WAN IP by charlie

charlie — Mon, 12 Jul 2010 11:47:15 +0000

Just one more thing! Is there a way to have the changes permanently on show? so you dont need to open the hidden menu’s each time.

Thanks

Comment on Draytek 2710 series and multi WAN IP by charlie

charlie — Mon, 12 Jul 2010 09:04:10 +0000

Soted it . Amazing thanks for your post…………….

Comment on Draytek 2710 series and multi WAN IP by charlie

charlie — Mon, 12 Jul 2010 08:20:24 +0000

Hi,
Great work, I also called Draytek support with a query on VPN and told them that when i go to the setup page of a vpn and copy all, then paste it to word, then you can see that there are more settings to be had if you could access them, I also got the same response buy the 2820 well i already have one of those for the office but i also have a 2710 and a 2110 else were and would like to tunnel my home router.

So to the tecky bit
Can you tell me how to activate the extra (hidden) VPN settings on my 2710n.

Regards
Charlie

Comment on Firefox 3.6 Tab Opening Behaviour by Jesse

Jesse — Fri, 11 Jun 2010 17:36:58 +0000

Thank you! Sometimes it even seemed like tabs would open in the middle if pages hadn’t loaded all the way.. so disorienting.

@Mike
In the about:config page, scroll down a few more to “browser.tabs.selectOwnerOnClose” and change it to false. Now when you close a tab, firefox will select the tab to the right.

Comment on Draytek 2710 series and multi WAN IP by Paul C

Paul C — Fri, 11 Jun 2010 10:33:56 +0000

I don’t wish to hijack the thread, but wondered which isp you were using with the 2710. I use BE Unlimited and have all sorts of issues with line disconnects and lowered download speeds (compared with my ‘older’ Netgear DG834PN, which was rock solid!).

The 2710 offers a more advanced interface than the Netgear and I may have missed a vital setting…

Comment on Dell 5530 HSPA Mobile Broadband Card with Windows 7 64bit by New firmware to 7.2Mb

New firmware to 7.2Mb — Tue, 11 May 2010 18:45:52 +0000

[...] For WWAN it is very easy. If you see near the clock you will see 5 strips. Just have a look here. There you can connect to your provider. If you have a different APN make a right click at the [...]

Comment on Draytek 2710 series and multi WAN IP by Wim Mooij

Wim Mooij — Thu, 08 Apr 2010 12:40:15 +0000

@Kaurie
Your thinking is correct: i’m based in Amsterdam. The router seems to be tweaked for various countries. I would expect that the differences were limited to the moodem section of the firmware only (e.g. to facilitate auto-detection of various adsl settings). It is strange to see that such diffferences also extend into the webmanagement software (although it is in the same section of the web management interfacce).